mono signal造句

• WOMM has a 100-watt mono signal and broadcasts within Chittenden County, Vermont.
• But A-B is a mono signal-just one value-but with no'V'in it!
• As for mono signals, a half-inverted signal would be reduced to ( near ) silence.
• This type of adaptor isn't really designed to combine two mono signals back into stereo.
• The technology is similar to parametric stereo, in which a mono signal is recovered to stereo.
• By combining multiple " pan-potted " mono signals together, a complete, yet entirely artificial, sound field can be created.
• :Yes, you can use an RCA connector splitter cable in this way to combine left and right stereo into a single mono signal.
• WVGR was forced to downgrade to a mono signal at 20, 000 watts, but resumed broadcasting from its own tower in the fall of 2006.
• These processes are designed to " recover lost or amplify hidden ambience, space and imaging, and generate stereo from mono signals without adding artificial reverberation ."
• In its simplest form, Covox received 8-bit, mono signal through the parallel port and produced analog output that could be amplified and played back on loudspeakers.
• For example, while a mono signal is played, the strong correlation to the center channel triggers the output volume of the left, right and surround channels to be lowered.
• Summing the two channels gives a highly compatible mono signal which in fact is a more accurate representation of the two-channel version than summing a conventional " panpotted mono " source.
• It had a high level of channel separation and could even be used to broadcast two mono signals-for example for language studies ( with two languages at the same time ).
• The station initially transmitted in an FM mono signal until the feed was upgraded to stereo in late 1996 with further enhancements to the quality of the stereo signal in late 2000.
• Further, he " admitted to ordering another transmitter, tower, and equipment, " although there are conflicting reports as to whether it is a 3, 000-watt or a 4, 000-watt transmitter with a mono signal.
• For instance, the left and right channels of a stereo source can be panned'straight up', that is sent equally to both the left output and the right output of the mixer, creating a dual mono signal.
• In audio terms, a proper mono signal would be A + B-but negating an audio waveform just switches the phase of the signal 180 degrees-and that doesn't sound too bad . . . certainly good enough for Kareoke!
• From the display, one can get a good feel for the audio levels for each channel, the amount of stereo and its compatibility as a mono signal, even to some degree what frequencies are contained in the signal.
• This involved splitting the mono signal into two channels, boosting the bass on one and the treble on the other, introducing a slight delay between the channels, and adding reverb-- all of which fooled the ear into hearing a recording as stereo.
• Based on that, here's what I think will happen : If you plug two mono male plugs into the adaptor's stereo female jacks, then the two mono signals ( tips ) will be mixed into the adaptor's male plug's left channel ( tip ).